tannenzweige dekorieren Deko-Zweig 4er Set Millies CAT_GIFT_IDEAS_HER

tannenzweige dekorieren Deko-Zweig 4er Set Millies CAT_GIFT_IDEAS_HER

Thermobecher to Go "Herz" rosa, € 12,00

Fluorescent pink exterior and white interior ceramic coffee mugs Wash by hand Lead free For use with a Mug Press or a Mug Wrap Helpful Resources Mug Master Pro Mug Press Idle Temperature: 390°F Press Temperature: 395°F Time: 180 - 200 Seconds Pressure: Firm Tape the sublimation paper with image printed in reverse to the mug with thermal tape When the heat press reaches the idle temperature, you will hear a beeping sound indicating that the machine is ready Place the coffee mug in the element and close it by pulling the handle towards you Press the green, round button to begin the pressing cycle (temperatures may drop which is normal) Once the press temperature is reached, the timer will begin counting down When the timer reaches 0, take out the mug from the press and remove the transfer paper immediately Allow the mug to cool completely before use GeoKnight DK3 Press Temperature: 400°F Time: 3 - 4 Minutes Pressure: Medium/Firm Attach sublimation transfer paper with image printed in reverse to the coffee mug with thermal tape Place mug in heat press at the press temperature, and close the element around it Press for the specified time above needed using specified pressure If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds Once done, remove the mug from the press and remove the transfer paper immediately Allow the mug to cool completely before use 4-in-1 Mug Press Press Temperature: 370°F Time: 250 Seconds Pressure: Medium/Firm Attach sublimation transfer paper with image printed in reverse to the mug with thermal tape Place mug in press at the press temperature, and close the element around it Press for the specified time above needed using specified pressure If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds Once done, remove the mug from the press and remove the transfer paper immediately Allow the mug to cool completely before use Oven Settings Press Temperature: 400°F Time: 12 - 15 Minutes (test in your oven for accurate time) Attach reversed printed image to mug with thermal tape Wrap silicone wrap around mug surface and clasp at handle Place in oven preheated to 400°F for approximately 12 - 15 minutes (test to determine best timing!) Afterwards, remove wrap and transfer immediately Allow the mug to cool completely before use We found other products you might like

CAT_GIFT_IDEAS_HER

Dimensions:24cm

ACHTUNG: WEGEN VERSCHLUCKBARER KLEINTEILE NICHT FÜR KINDER UNTER 3 JAHREN GEEIGNET